Trusted Local AutoFind a Shop
Back to Blog
Windshield And Auto Glass Repair

Can You Fix a Windshield Chip Yourself? DIY Kits and When to Call a Pro

informational·informational·

Sources and date

As of 2026, this guide uses advice from AAA, Allstate Canada and Manitoba Public Insurance, a 2026 Jalopnik article for the U.S. kit price, a 2011 Grainews kit test, and the instructions of DIY kits and repair guides. This guide found no government rule for DIY chip kits, so the label of your kit is the rule to follow.

Kit or professional? Check the size and the place of the damage

The chip is small, shaped like a star or a rough circle, away from the edge and outside the driver's direct view
A DIY kit can do this job: kits work best on this kind of damage. Do it soon, because most windshield damage stays repairable when you act quickly. Follow the steps below.
The damage is larger than a quarter, near the edge, or in front of a driver-assistance (ADAS) camera
Leave it to a professional. A glass shop can tell you whether the glass can still be repaired or must be replaced. For damage in front of a camera, see what ADAS calibration adds to a repair bill.
The chip is in the driver's direct view
Leave it to a glass shop, not a kit. If the damage blocks your view of the road, do not drive the vehicle until it is fixed.

How to use a windshield chip repair kit, step by step

  1. 1
    Read the kit label

    Before you start, find the size limit, the glass temperature range and the cure time on the label of your kit. These values differ from kit to kit.

  2. 2
    Work in the shade and clean the glass

    Keep the windshield out of direct sunlight while you work, and clean the glass around the chip.

  3. 3
    Attach the applicator

    Attach the suction-cup tool to the glass over the chip.

  4. 4
    Add the resin and push out the air

    Add the resin to the tool and push the air out of the chip, as your kit label says. Then wait for the time that the label gives.

  5. 5
    Cover the resin and cure it in the sun

    Put a curing strip over the resin, then let the resin cure in direct sunlight for the time on the label.

  6. 6
    Remove the strip and the extra resin

    When the resin has fully cured, take off the curing strip and scrape off the extra resin.

Did you find what you were looking for?

What can go wrong with a DIY chip kit

  • The resin gets sun too soon. The resin cures in the UV light of the sun, so kit instructions ask you to fill the chip in the shade and to give the resin direct sun only for the cure.
  • The glass is too cold or too hot. The ranges differ: one kit label asks for glass at 10 to 25 °C (50 to 77 °F), and Allstate Canada gives 0 to 29 °C (32 to 84 °F) for a windshield repair. Use the range on your own kit.
  • Air stays in the chip. One kit's instructions ask you to look at the repair area from inside the vehicle to make sure that no air bubbles stay.

DIY kit or professional chip repair: side by side

DIY kit or professional chip repair: side by side
PointDIY kitProfessional repair
Price in the U.S., as of 2026Under USD 20 for an over-the-counter kit for minor fixes (one U.S. article, 2026)USD 60 to 100 for a small chip; the price varies by state and city
Who does the workYou, with the steps and limits on your kit labelA glass shop. In Manitoba, Manitoba Public Insurance accepts the repair of small chips or cracks as a repair option when a professional does it properly.

Is a DIY kit worth it? A cost check with your own numbers

With the U.S. prices in the table, a kit that works saves more than USD 40 on a small chip at the low end (USD 60 − USD 20) and more than USD 80 at the high end (USD 100 − USD 20). In Canada, compare the shelf price of a kit with a quote from a local glass shop. If a kit costs you CAD 25 and a shop quotes CAD 90, a kit that works saves CAD 65 (CAD 90 − CAD 25). If the kit fails and you then pay the shop, you spend CAD 115 in total (CAD 25 + CAD 90).

Related guides

What to remember

  • A small chip is a kit job only while it stays small: do not wait.
  • Fill the chip in the shade, cure the resin in the sun, and check from inside that no air stays.
  • Find a windshield and auto glass repair shop near you and ask for a written quote.

Frequently asked questions

How long does windshield chip repair resin take to cure?

From about 10 minutes to 1 hour or more, by kit and by light. One repair guide says to let the resin cure for about 10 minutes before you take off the curing strips. The instructions of another kit ask for 15 minutes in direct sunlight, or at least 1 hour on a cloudy day. Use the time on your own kit label.

Will a windshield chip disappear after a DIY repair?

Not always. The instructions of one kit caution that the chip may not fully go away after the repair, so expect that a mark can stay where the chip was. After the cure, look at the spot from the driver's seat to see whether the mark is in your line of sight.

Can I use super glue on a windshield chip or crack?

No. Super glue does not reliably or safely stop a windshield crack from spreading. Use the resin that comes with a windshield repair kit for a small chip, or ask a glass shop to repair the damage.

Can you fix a windshield crack yourself?

Only a small one away from the edge of the glass that fits the size limit on your kit label. Kits can often fix a small Angel Wing crack, but a larger crack, or one that keeps spreading, may need a full windshield replacement. A crack near the edge typically needs a replacement too, and a replacement is a job for a glass shop, not for a kit.

Did this post answer your question?

Find trusted Windshield & Auto Glass Repair shops near you

Compare local independent shops that offer Windshield & Auto Glass Repair and choose the right fit for your vehicle.

Find Windshield & Auto Glass Repair shops

Share or ask AI about this article

Continue the conversation or send this guide to someone who needs it.