Damage Behind the Bumper: How to Check After a Low-Speed Hit
How do you check for damage behind a bumper after a low-speed hit?
Check what you can see: cracked lamps or reflectors, a hood, trunk or door that does not work normally, and fuel or coolant drips. Then have a technician take the bumper cover off: a foam energy absorber that took a hit cannot absorb energy again, even when the cover shows no scratch. The U.S. federal bumper standard tests passenger cars at 2.4 and 4 km/h (1.5 and 2.5 mph).
Sources for this guide
Sources, as of 2026: the U.S. federal bumper standard, 49 CFR Part 581 (10-1-25 edition); I-CAR repair articles on bumper covers and driver-assistance sensors; the Insurance Bureau of Canada and the Insurance Information Institute (U.S.) on deductibles; the IIHS bumper test protocol (2007); a 2008 Government of Canada news release on bumper test speeds; and a U.S. public-television car program on hidden accident damage. The Canadian release gives no test speed, so the speeds in this guide come from the U.S. standard and the IIHS tests.
What is in and behind a car bumper
- Bumper cover: the outer shell that you see.
- Energy absorber: material under the cover that takes up the energy of a hit. One type is made of foam.
- Bumper face bar and mounts: the bar of the bumper system, and the parts and fasteners that attach it directly to the frame of the car.
- Park assist sensors: ultrasonic (sound-wave) sensors in the front and rear bumper covers that help you park.
- Radar and sonar sensors: sensors for driver-assistance systems (ADAS) in the front and rear bumpers.
U.S. and Canadian bumper rules: test speeds and allowed damage
In the U.S., the federal bumper standard for passenger cars uses a pendulum-type test device, a swinging test weight. It strikes the car at 2.4 km/h (1.5 mph), and again at 4 km/h (2.5 mph) before a hit into a fixed barrier. After each hit, the outer surfaces must keep their paint and their shape, but that rule does not apply to damage to the bumper face bar or to the parts that attach it to the frame. In Canada, a federal regulation that took effect on June 25, 2008, set car bumper test speeds to match those already in place in North American and European markets.
Did you find what you were looking for?
How to check your car after a low-speed bumper hit
- 1
Look for cracked lamps and reflectors
Look at each lamp and reflector at the end of the car that took the hit, and note each crack.
- 2
Open and close the hood, trunk and doors
Open and close each one near the hit. Note a panel that sticks, rubs or does not close as before.
- 3
Look under the car for drips
Park on a clean, dry surface and look under the end that took the hit. If you smell fuel or see fuel or coolant drip, do not drive the car; have it towed.
- 4
Have the cover taken off
Steps 1 to 3 follow the items that the U.S. bumper test requires to stay intact after its hits. The energy absorber sits under the cover, so a technician checks it with the cover off. Ask for the same check of the parts that attach the bumper to the frame.
- 5
Ask for a sensor check
If the car has parking or driver-assistance sensors in the bumper, ask the technician to inspect the sensor areas. Repair guidance tells technicians to inspect these areas after any impact.
Bumper sensors in the repair: care and calibration
The insurance deductible for bumper damage in Canada and the U.S.
In Canada, a deductible is your own share of a covered claim: you pay that amount, and your insurer pays the rest of the eligible amount. If your estimate is CAD 1,200 and your deductible is CAD 500, you pay CAD 500 and the insurer pays up to CAD 700. In the U.S., an auto deductible applies each time you file a claim: with a USD 500 deductible, two claims for two separate hits cost you USD 1,000 in deductibles. When an estimate is close to your deductible, weigh paying yourself against a claim.
Related guides
- Frame Repair vs Cosmetic Damage: How Serious Is Your Collision?
When the hit may have gone past the bumper into the structure of the car.
- Plastic Bumper Repair vs. Replacement: Which Is Cheaper?
When the cover itself is cracked or torn and you must choose between repair and a new cover.
Key Takeaways
- Photograph each crack, sticking panel or drip before the repair, so that you can compare your notes with what the shop finds behind the cover.
- While the cover is off, ask the shop to show you the energy absorber and the bumper mounts.
- Ask a bumper repair shop for a written estimate that lists parts, labour and any sensor work.
Frequently Asked Questions
What is the purpose of a car bumper?
Its job is to reduce physical damage to the front and rear of the car in low-speed collisions. In the U.S., that is the stated purpose of the federal bumper standard for passenger cars. Research tests have used higher speeds than that standard: the IIHS bumper tests (2007 protocol) hit each model at 10 km/h (about 6 mph) front and rear, and at 5 km/h (about 3 mph) on the corners.
Is a scan after a bumper repair the same as a calibration?
No. A scan reads the car's computer systems and their fault codes; it does not calibrate the sensors. In most cases, a replaced sensor or module does not know that it was replaced or that it needs a calibration. So when the repair calls for a calibration, look for it as a separate line on the invoice.
Do parking sensors need a calibration after a bumper replacement?
Usually not. Park assist sensors normally get a system test after they are installed, because most vehicle makers ask for that test and not for a calibration. The test checks that the parking system works. If the shop removes or replaces these sensors, ask for the system test on the estimate.
Does fault change the amount of my deductible in Canada?
No. After a collision, the amount of your deductible is the same whether you caused the crash or the other driver did. Before you file a claim for bumper damage, ask your insurer whether your deductible applies to this claim under your policy and in your province.
Did this post answer your question?
Find trusted Bumper Repair & Replacement shops near you
Compare local independent shops that offer Bumper Repair & Replacement and choose the right fit for your vehicle.
Find Bumper Repair & Replacement shopsShare or ask AI about this article
Continue the conversation or send this guide to someone who needs it.
Related guides
Mobile Bumper Repair: Which Damage Needs a Body Shop Instead
Before a mobile bumper repair: which damage needs a body shop, the maker rules near sensors and radar, the paint rules for spraying at home, and insurer steps.
Will a Cracked Bumper Fail a Safety Inspection? Canada and U.S. Rules
Which bumper faults fail a safety inspection in Ontario, BC, Pennsylvania and Virginia, and how to check a cracked bumper before the test.
How to Fix a Scuffed Bumper: What Works at Home and When to Call a Shop
A bumper scuff that your fingernail does not catch can probably be removed at home. Learn when a scratch needs a body shop and what shops charge in CAD and USD.