How Much Does Frame Damage Repair Cost?
How much does frame damage repair cost?
A 2026 U.S. price guide puts minor frame straightening at USD 600 to 1,200, moderate frame damage at USD 1,200 to 4,000, and severe damage, where a frame rail or section is cut out and a new one welded in, at USD 3,500 to 10,000 or more. In British Columbia, ICBC's 2026 rate for frame labour at its program shops is CAD 111.45 an hour with materials.
Where these prices come from
Price ranges: a 2026 U.S. price guide and a 2026 U.S. repair-cost summary. What moves the price: also a 2025 shop price list from the Greater Toronto Area, Ontario. Labour rates: ICBC, British Columbia, 2026, and the same U.S. summary. Sensor costs: AAA (2023). Repair methods: I-CAR, a collision repair training group. Insurance rules: the Financial Consumer Agency of Canada, the Insurance Bureau of Canada and the U.S. National Association of Insurance Commissioners, as of 2026. These are published guide figures, not a survey or a quote.
Frame damage repair cost by damage level in the U.S.
| Damage level | What the work is | U.S. price, 2026 (USD) |
|---|---|---|
| Minor | A slightly misaligned section pulled back to specification on a frame machine | USD 600 to 1,200 |
| Moderate | Damage between the minor and severe bands | USD 1,200 to 4,000 |
| Severe | A frame rail or section cut out and a new one welded in | USD 3,500 to 10,000 or more |
| All levels (second U.S. source) | Frame and structural damage, one wide range | USD 1,000 to 10,000 or more |
Why frame repair price ranges differ
The two 2026 U.S. sources start at different points: minor straightening begins at USD 600 in the price guide, while the repair-cost summary puts all frame and structural work at USD 1,000 and up. The price guide sets its bands by severity, not by front or rear damage, and parts on the damaged end, such as front radar sensors, add their own cost. A 2025 shop price list in the Greater Toronto Area also ties the price of measuring and straightening to how far the impact travelled.
Hourly labour rates for frame and body work
| Type of labour | Where and when | Rate per hour |
|---|---|---|
| Frame labour (insurer rate for program shops) | British Columbia, 2026 | CAD 104.32 labour + CAD 7.13 materials = CAD 111.45 |
| Body labour (same rate sheet) | British Columbia, 2026 | CAD 91.25 labour + CAD 7.13 materials = CAD 98.38 |
| Collision repair labour (repair-cost summary) | Southern California, 2026 | USD 56 to 98 |
Did you find what you were looking for?
How frame labour hours and rates make the labour line of an estimate
The labour line of an estimate is its hours multiplied by the hourly rate. On ICBC's 2026 sheet for British Columbia, frame labour costs CAD 13.07 an hour more than body labour (104.32 − 91.25 = 13.07). If your estimate lists 8 hours of frame labour at CAD 111.45 with materials, the line is 8 × 111.45 = CAD 891.60. If a shop in Southern California charges USD 98 an hour, 8 hours is 8 × 98 = USD 784. Use the hours on your own estimate in place of the 8.
Maker rules and sensors that change the repair
- A maker rule against straightening. When the vehicle maker does not allow cold straightening (straightening without heat) of a part, no repair is possible and the part must be replaced.
- Heat on high-strength steel. One maker group requires replacement of a structural high-strength steel part that was straightened with heat.
- A ban on pulling. One maker does not allow its body structure to be pulled or pushed with frame straightening equipment.
- Sensor calibration. Almost all driver-assistance sensors need calibration, and some, such as forward radars and windshield cameras, need very precise aiming.
Driver-assistance sensors: the extra cost after a front-end hit
In a 2023 AAA study of three 2023-model vehicles, replacing driver-assistance parts cost USD 1,540.92 on average in a minor front collision repair, or 13.2% of the average total estimate of USD 11,708.29. One front radar sensor for automatic emergency braking and adaptive cruise control cost USD 500 to 1,300. These amounts cover the sensors only, not body work or other collision repairs. A sensor that is out of alignment sends wrong data to the driver-assistance system, so the system can work badly or stop working. Read more about what calibration adds to a collision repair.
How a shop repairs a bent frame
- 1
Measure the structure
The technician measures the vehicle in three dimensions, which gives an accurate picture of the damage, and records the measurements before straightening.
- 2
Check the maker's repair information
The shop looks up the maker's repair information for how the body is built and which parts can be repaired.
- 3
Straighten on a frame machine
The vehicle is anchored and the bent area is pulled back to specification. Heat goes on only when the vehicle maker allows it.
- 4
Section or replace
A part that cannot be straightened is replaced, or its damaged section is cut out and a new one welded in.
- 5
Measure again
The technician measures the structure again and records the measurements after straightening.
Is frame damage repairable on unibody and body-on-frame cars?
A body-on-frame vehicle has its body attached to a separate frame, often on rubber mounts. In a unibody vehicle, the body and the frame are one structure. In both types, the damage may be repairable, depending on how severe it is. Many crashes that bend a frame, though, leave damage too severe to bring back a safe, fully working structure. If you are not sure the damage reached the frame, learn how to tell frame damage from cosmetic damage after a collision.
Repair or write-off: how the decision is made
Does insurance cover frame damage repair?
Collision coverage pays to fix damage to your own car after it hits another vehicle or an object, for example a tree. Coverage terms differ by policy, and in Canada also by province, so read your policy and ask your insurer what it covers before the repair starts. For a smaller repair, compare paying yourself with filing a claim.
Related guides
- Can a Mechanic Charge More Than the Estimate? Your Rights
What to do when the final bill for a repair is far above the estimate.
- Repairing vs. Replacing: When is a Car No Longer Worth Fixing?
How to decide if a costly repair still makes sense for an older car.
Key Takeaways
- Severity sets the price band, from a minor pull on a frame machine to a frame section cut out and replaced.
- Frame labour is billed by the hour, and on ICBC's 2026 rate sheet for its British Columbia program shops, the frame rate is above the body rate.
- On a front-end collision repair, driver-assistance sensor parts and their calibration add to the total estimate.
- Ask a frame straightening shop to measure the frame and give you a written estimate that lists frame labour hours, parts, sensor calibration and tax.
Frequently Asked Questions
Can any body shop fix frame damage?
No. Not every body shop has the tools and skills to bring a damaged frame back to how it was before the crash. Before you agree to the work, ask whether the shop has a frame machine and three-dimensional measuring equipment, and whether its technicians have training in measuring, anchoring and pulling a vehicle structure.
Can an aluminum car frame be straightened?
Not always. One maker group does not approve straightening or pulling on its aluminum vehicles. In British Columbia, the 2026 insurer rate sheet lists structural aluminum labour at CAD 109.50 an hour, which is 20% above the CAD 91.25 body rate, or CAD 116.63 an hour with materials. Ask the shop if your model allows straightening of its aluminum parts.
How does my deductible work on a frame repair claim?
A deductible is the part of a claim that you agree to pay before the insurer pays the rest. For example, if the approved frame repair costs CAD 4,000 and your deductible is CAD 500, you pay CAD 500 and the insurer pays CAD 3,500. With a USD 1,000 deductible on a USD 6,000 repair, you pay USD 1,000 and the insurer pays USD 5,000.
Will insurance pay to fix old frame damage from an earlier accident?
It may not. Insurers may refuse to cover a car with frame damage that was there before the claim, or reduce the payout because of that earlier damage. In Canada, your insurer pays for repairs that return the car to the condition it was in before the damage.
Did this post answer your question?
Find trusted Frame Straightening shops near you
Compare local independent shops that offer Frame Straightening and choose the right fit for your vehicle.
Find Frame Straightening shopsShare or ask AI about this article
Continue the conversation or send this guide to someone who needs it.
Related guides
What Is Frame Straightening and How Does a Body Shop Do It?
What frame straightening is, how a body shop measures, anchors and pulls a bent frame or unibody, and which parts are replaced instead.
How to Check a Used Car for Frame Damage Before You Buy
A buyer's checklist for frame damage: what to check on the lot and the test drive, what history reports and dealers must show, and who should inspect the car.
Ontario Structural Inspection Certificate: What It Is and When You Need One
What Ontario's Structural Inspection Certificate is, which vehicles need one, who issues it, what it checks, the cost rules and how Salvage becomes Rebuilt.