Trusted Local AutoFind a Shop
Back to Blog
Frame Straightening

Ontario Structural Inspection Certificate: What It Is and When You Need One

informational·informational·

Sources for Ontario structural inspections, as of 2026

This guide uses three Government of Ontario sources, as of 2026: the mandatory vehicle branding program page, the Safety Standards Certificate page, and Directive Schedule 5 for structural inspections (version 1.1, July 2026). The official pages list no owner fee for the Structural Inspection Certificate, so confirm the current rules and fees with the Ministry of Transportation or ServiceOntario before you start.

Salvage, Rebuilt and Irreparable brands in Ontario

Salvage, Rebuilt and Irreparable brands in Ontario
BrandWhat it means for the owner
SalvageThe vehicle was written off as a total loss. It can be repaired, or used for parts or scrap.
RebuiltA former Salvage vehicle that was repaired and then received the new brand.
IrreparableAlso a total loss, but it can only be used for parts or scrap. It cannot be driven again in Ontario.

Which vehicles get a structural inspection in Ontario

  • Salvage-branded vehicles that were repaired and need the Rebuilt brand.
  • Re-assembled vehicles: the body of a vehicle from model year 1981 or later joined to the chassis frame of another vehicle.
  • Vehicles with a Rebuilt brand from another province or state: the rule for this case differs. Ask a DriveON centre before you buy or register one.

Who can issue a structural inspection certificate near you

A salvage vehicle must be inspected and certified at a specialized DriveON Vehicle Inspection Centre that is licensed for in-depth structural inspections. Call the centre to confirm that licence before you book. Ontario's structural directive lets only a registered technician with a 310B Certificate of Qualification (a trade certificate) from Skilled Trades Ontario do the inspection. Apprentices may not do inspections. A 310B technician may inspect Salvage-branded vehicles built in 1981 or later.

Did you find what you were looking for?

What the structural inspection checks

The structural standard has four parts: chassis alignment, structural components, body and wheel alignment. For each item, the technician selects one of three results: Pass, Fail or Repaired. The table shows the limits that a repaired vehicle must meet.

Structural limits in Ontario's inspection directive

Structural limits in Ontario's inspection directive
Part of the standardWhat must be true at the inspection
Chassis alignmentWithin 3 mm of the maker's specification at each control and reference point, or the maker's larger tolerance.
Structural componentsNo structural part of the chassis is missing, broken, cracked, loose, buckled or rusted through.
Wheel alignmentThe alignment is within the maker's specifications.

How to get a Structural Inspection Certificate and a Rebuilt brand

  1. 1
    Photograph the damage before the rebuild

    The inspection technician must take photos that clearly show any damage to the front, rear and sides of the salvage vehicle before it is rebuilt. You must also have your own photos of the vehicle in its damaged state.

  2. 2
    Keep the repair paperwork

    Keep the documents and detailed invoices for the vehicle. The centre also needs a completed Rebuilt Vehicle Parts Audit Form and the insurer's estimate of repairs.

  3. 3
    Have the structural inspection done

    The technician checks the vehicle against the standard and takes four colour photos that show all four sides of the vehicle as it is now. A vehicle that passes gets its Structural Inspection Certificate.

  4. 4
    Get the Safety Standards Certificate too

    Have the regular Ontario safety inspection done as well, and get the Safety Standards Certificate from the inspection centre.

  5. 5
    Finish at ServiceOntario

    Submit the Structural Inspection Certificate at any ServiceOntario location to have the Salvage brand changed to Rebuilt.

What Ontario's rules say about inspection costs

Ontario's Safety Standards Certificate page says that the price of that inspection and certificate differs at each inspection centre, and the province does not regulate it. The Safety Standards Certificate stays valid for 36 calendar days from the inspection date. If it expires before you register the vehicle, you pay for a new inspection and certificate. After a structural Fail, the owner is not charged for the re-inspection, but may be charged where wheels must be removed.

If the vehicle fails the structural inspection

The vehicle fails the structural inspection
You get a Structural Vehicle Inspection Report with a Fail result. ServiceOntario does not accept that report for any vehicle transaction.
The failed parts are repaired
The re-inspection is done by the same centre that gave the Fail result, and it can be limited to the parts that failed.

Related guides

Key Takeaways

  • Check the brand of a written-off car before you buy it or pay for its repair.
  • Book the structural inspection only after the rebuild is complete: the certificate is issued for a rebuilt vehicle that meets the standard.
  • Next step: ask a frame-straightening shop for a written estimate for the structural repair before the rebuild starts.

Frequently Asked Questions

Does every car with frame damage need a Structural Inspection Certificate in Ontario?

No. Ontario's rules limit structural inspections to Salvage-branded vehicles, re-assembled vehicles and vehicles with a Rebuilt brand from another province or state that are being registered in Ontario. Other vehicles must not get a structural inspection, so a car with repaired frame damage that is in none of these groups cannot get this certificate.

Can a motorcycle get a Structural Inspection Certificate in Ontario?

No. Ontario's vehicle branding rules say that a Structural Inspection Certificate cannot be issued for a motorcycle. If you plan to buy or repair a written-off motorcycle in Ontario, ask ServiceOntario or a DriveON Vehicle Inspection Centre what its brand means before you pay for the bike or the repair.

Do I need an insurance estimate for a structural inspection in Ontario?

Yes, for a Salvage-branded vehicle, with one exception. The inspection centre needs the estimate of repairs that the insurer, or the other person who declared the vehicle a total loss, prepared. The exception is a vehicle that already had a Rebuilt brand in another province or state: for that vehicle, ask a DriveON centre which papers it needs.

What if ServiceOntario refuses my Structural Inspection Certificate?

The inspection centre uploads each Structural Inspection Certificate to ServiceOntario automatically. If ServiceOntario refuses a certificate because of an error in the inspection, go back to the centre that issued it: the technician must correct the error at no cost to you.

Can I add rust-proofing or sealant to repaired chassis joints before the structural inspection?

No. At the time of the structural inspection, every structural joint of a repaired or replaced chassis component must be accessible for inspection, clean, and free of sealant, soundproofing and rust-proofing material.

Did this post answer your question?

Find trusted Frame Straightening shops near you

Compare local independent shops that offer Frame Straightening and choose the right fit for your vehicle.

Find Frame Straightening shops

Share or ask AI about this article

Continue the conversation or send this guide to someone who needs it.